rigid joint
英 [ˈrɪdʒɪd dʒɔɪnt]
美 [ˈrɪdʒɪd dʒɔɪnt]
网络 刚性连接; 刚结点; 刚性结合; 刚性节点; 刚节点
双语例句
- Experimental Study on Seismic Behavior of Rigid Connection Joint between Steel Beam and Concrete Wall
钢梁与混凝土墙刚接节点抗震性能试验研究 - Finite element analysis of concrete-filled steel column and steel beam rigid joint
钢管混凝土柱-钢梁刚性节点有限元分析 - Because the ideal "rigid joint" and "hinged joint" are inexistent, the stiffness of any connection types is between ideal rigid joint and hinged joint.
因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。 - In the structure of Communication Information Center of Shenzhen, the steel bar passed through rigid joint is adopted in CFST frame.
深圳市邮电信息枢纽中心大厦工程中，钢管混凝土框架的梁柱节点，采用了钢筋贯通式刚接节点。 - At a rigid joint of a space frame, three resolution and three moment equations can be written.
在空间框架的一个刚性节点处，可以写出三个分力方程和三个力矩方程。 - Noisy, sloppy footwork stems in part from a rigid ankle joint.
粗糙的步法，往往是由于僵硬的踝关节而导致的。 - Welding residual stresses of cover-plate retrofitted steel moment connections Experimental Study on Seismic Behavior of Rigid Connection Joint between Steel Beam and Concrete Wall
梁柱刚接节点盖板加固的焊接残余应力分析钢梁与混凝土墙刚接节点抗震性能试验研究 - The results of the cyclic loads test show that the welded-cover-plates steel frame rigid joint has good ductile performance and plastic hinge could appear in the expectant place.
针对钢框架梁柱栓焊混合刚性节点易出现的焊缝脆性破坏形式及其机理，对节点构造设计提出了改进意见，即在节点位置加焊楔形盖板。 - Two rigid joint particle sphere system is the mechanics model of the theory mechanics.
刚性连接两质点球系统是理论力学教学中一种力学模型。 - After the finite element analysis of K-type tubular joints and K-type castle steel joints, it is presented that the K-type castle steel joint can not be regarded as both hinged joint and rigid joint.
通过对K型铸钢节点与K型钢管相贯节点的有限元分析表明，K型铸钢节点应用于结构后，节点连接不能按照相贯节点铰接假设计算，也不可按照简单刚接考虑。 - The equations on the critical loads are presented under the conditions of both hinge joint and rigid joint between the polystyle columns and roof truss.
通过理论推导分别得出了有关屋架与柱铰接和屋架与柱刚接情况下的多肢柱受压失稳的临界载荷方程。 - Experimental Evaluation of Ductility Behavior of Steel Frame Rigid Joint Welded with Cover Plates
盖板型钢框架刚性节点延性性能试验研究 - In the design of steel frame structure, the engineers generally design the beam-column connection as so-called "rigid joint" to resist the structure's lateral and reduce the lateral displacement efficiently.
在钢框架设计中，工程师们一般都将梁柱连接做成所谓的刚节点，以抵抗结构的侧向荷载和降低结构在侧向荷载作用下所产生的水平位移。 - The results of the rigid joint show that deformations of facing joint are quite big, even exceed the deformation capacity of common sealing structure.
两种连接方式下，面板周边缝变位差别较大，采用刚性连接方式时，面板周边缝有较大沉陷，甚至超过一般止水构件所能承受的变形能力。 - Numerical Simulation Analysis of a Certain Semi-rigid Joint
一种半刚性节点的数值模拟试验研究 - In order to resist the structure's lateral load and reduce the lateral displacement efficiently in the tier or tall building structure, it is generally designed the joint as rigid joint earlier.
早期的多高层建筑钢结构设计，为了能有效地抵抗结构的侧向荷载和降低结构在侧向荷载作用下所产生的水平位移，一般把梁柱连接设计成刚性连接。 - Elementary introduction to design of beam-column rigid joint
浅谈梁柱刚性节点设计 - Vertical stiffener joint, a new type of rigid joint between concrete-filled steel square tubular column and H-steel beam, is proposed based on the analysis of construction and features of three types of rigid joints.
在分析方钢管混凝土柱-H型钢梁框架3种刚接节点的构造形式和特点的基础上，提出了一种新型刚接节点&外肋环板节点。 - The new structural type of the framed bent of rigid joint, which improves the internal force by the PPC horizontal rod, is composed of the portal frame and the framed bent.
在大跨度无铰门式刚架的基础之上增设部分预应力水平拉杆，可有效地改善结构的受力，具有门武刚架和排架的特点。 - The welding seem stress of beam-flange is the major factor which decides the behavior of dog-bone style rigid joint and only the better welding can exert the function of the dog-bone.
梁翼缘处的焊缝强度是决定狗骨式刚性连接节点性能的主要因素，只有具有良好的焊缝质量才能发挥狗骨的作用。 - A Method of Weighted Residuals with B_3 Spline Functions for Analyzing the Rigid Joint System of Frame with Shear Walls Subjected to Various Horizontal Loads
框架&剪力墙刚接体系在任意水平力作用下的三次B样条加权残值法 - Earthquake-resistance Design Discuss of Steel Structure Rigid Joint
钢结构梁柱刚性节点抗震设计探讨 - In the connection design of the steel frame and the gabled frame, the high-strength bolt with end plate connection is extensively used at the rigid joint where the beam is connected to the strong axis of the column.
钢结构的框架和门式刚架节点设计中，梁与柱强轴方向的刚性连接节点常采用端板式高强螺栓连接。 - Analysis of Fatigue Behavior of a Certain Semi-rigid Joint with Top-and-seat Angle
双腹板&顶底角钢的半刚性节点低周疲劳性能研究 - The research indicates that the style of structure has a significant effect on the cost of project and it is better to apply frames braced construction with rigid joint to heavy-duty multi-span plant.
研究表明，结构体系类型对工程的经济性具有重要影响，多跨重型钢结构厂房宜采用节点刚接的框架&支撑结构体系。 - Application of Rigid Joint Chain in Arc-Length-Preserving Curve Deformation
刚性关节链模型在保弧长曲线变形中的应用 - The clinical manifestations include symmetric arthralgia, movement dysfunction, even rigid joint deformation, disability and involvement of multiple organs.
临床表现为关节对称性疼痛、运动障碍、甚至关节强直畸形致残，以及多脏器受累。 - The results show that the stress distribution mechanism of rigid joint of arch foot improved by various measures is more reasonable than before.
计算结论表明：通过优化和改进后的拱脚刚结点局部应力分布机制更趋于合理。